Bolt-on Harness Bar for 1st Gen MINI!  Brey-Krause harness mount bars for MINI are engineered and tested to mount driving harnesses securely and do not interfere with the normal use of factory seats and belts. Our harness mount bars and seat belt mounting kits install easily, use only factory mounting points and will not damage the car in anyway.  By making extensive use of water-jet machined sections and unique geometry, the R-1305 is our strongest and lightest harness bar of this configuration. It is also the only harness mount currently available for the 1st Gen MINI Cooper. 

True Bolt-on Solution = No modifications Required

• The R-1305 is a bolt-in part that requires no drilling, cutting or fabrication.
• It can be easily removed to allow use of the rear seat area for daily driving.
• The lower seat cushion can remain while the bar is installed to satisfy sanctioning bodies for autocross.
• Can be removed within 15min (just 4 bolts) - convenient removal after your trackday/autoX

Tested& Certified by an Independent Lab

• designed to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.

Safe & Properly Designed Solution

• This harness mount bar properly locates and supports racing shoulder harnesses relative to the driver.
• In the case of an accident, it helps protect the driver's shoulders and spine.
• The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking.

Material: Type 304, stainless steel.
Finish: Powdercoated in durable black wrinkle-finish.
Weight: 16.5 lbs.
Installation: Bar attaches to front and rear lap belt mounting points. It can be removed for access to the rear seat (floor brackets remain in place).
Miscellaneous: Bar limits seat travel to the rear approximately 1 inch.

Model compatibility:

• MINI Cooper & Cooper S: 2002-2006 Only
• Does not fit 2nd Gen MINI